##      Unpackerr Example Configuration File      ##
## The following values are application defaults. ##
## Environment Variables may override all values. ##
####################################################
#drfrankenstein.co.uk edit for guide 08/07/2023 taken from config version from 
#https://github.com/Unpackerr/unpackerr/blob/main/examples/unpackerr.conf.example
#See the above to add any additional config you wish to use..

# [true/false] Turn on debug messages in the output. Do not wrap this in quotes.
# Recommend trying this so you know what it looks like. I personally leave it on.
debug = false

# Disable writing messages to stdout. This silences the app. You should set a log
# file below if you set this to true. Recommended when starting with systemctl.
quiet = false

# Setting activity to true will silence all app queue log lines with only zeros.
# Set this to true when you want less log spam.
activity = false

# The application queue data is logged on an interval. Adjust that interval with this setting.
# Default is a minute. 2m, 5m, 10m, 30m, 1h are also perfectly acceptable.
log_queues = "1m"

# Write messages to a log file. This is the same data that is normally output to stdout.
# This setting is great for Docker users that want to export their logs to a file.
# The alternative is to use syslog to log the output of the application to a file.
# Default is no log file; this is unset. log_files=0 turns off auto-rotation.
# Default files is 10 and size(mb) is 10 Megabytes; both doubled if debug is true.
# Windows paths must use two backslashes: "C:\\Some\\Path\\Unpacker.log" (true everywhere).
#log_file = "/config/unpackerr.log"
log_files = 10
log_file_mb = 1

# How often to poll sonarr and radarr.
# Recommend 1m-5m. Uses Go Duration.
interval = "5m"

# How long an item must be queued (download complete) before extraction will start.
# One minute is the historic default and works well. Set higher if your downloads
# take longer to finalize (or transfer locally). Uses Go Duration.
start_delay = "1m"

# How long to wait before removing the history for a failed extraction.
# Once the history is deleted the item will be recognized as new and
# extraction will start again. Uses Go Duration.
retry_delay = "5m"

# How many files may be extracted in parallel. 1 works fine.
# Do not wrap the number in quotes. Raise this only if you have fast disks and CPU.
parallel = 1

# Use these configurations to control the file modes used for newly extracted
# files and folders. Recommend 0644/0755 or 0666/0777.
file_mode = "0644"
dir_mode = "0755"

[webserver]
## The web server currently only supports metrics; set this to true if you wish to use it.
  metrics = false
## This may be set to a port or an ip:port to bind a specific IP. 0.0.0.0 binds ALL IPs.
  listen_addr = "0.0.0.0:5656"
## Recommend setting a log file for HTTP requests. Otherwise, they go with other logs.
  log_file = ""
## This app automatically rotates logs. Set these to the size and number to keep.
  log_files = 10
  log_file_mb = 10
## Set both of these to valid file paths to enable HTTPS/TLS.
  ssl_cert_file = ""
  ssl_key_file = ""
## Base URL from which to serve content.
  urlbase = "/"
## Upstreams should be set to the IP or CIDR of your trusted upstream proxy.
## Setting this correctly allows X-Forwarded-For to be used in logs.
## In the future it may control auth proxy trust. Must be a list of strings.
  upstreams = [ ] # example: upstreams = [ "127.0.0.1/32", "10.1.2.0/24" ]

##-Notes-#######-READ THIS!!!-##################################################
## The following sections can be repeated if you have more than one Sonarr,   ##
## Radarr or Lidarr, Readarr, Folder, Webhook, or Command Hook.               ##
## You MUST uncomment the [[header]] and api_key at a minimum for Starr apps. ##
##                ALL LINES BEGINNING WITH A HASH # ARE IGNORED               ##
##            REMOVE THE HASH # FROM CONFIG LINES YOU WANT TO CHANGE          ##
################################################################################

[[sonarr]]
  url = "http://172.20.0.1:8989"
  api_key = "0123456789abcdef0123456789abcdef"
  paths = ['/data/torrents/completed']
  protocols = "torrent"
  timeout = "10s"
  delete_orig = false

[[radarr]]
  url = "http://172.20.0.1:7878"
  api_key = "0123456789abcdef0123456789abcdef"
  paths = ['/data/torrents/completed']
  protocols = "torrent"
  timeout = "10s"
  delete_orig = false

[[lidarr]]
  url = "http://172.20.0.1:8686"
  api_key = "0123456789abcdef0123456789abcdef"
  paths = ['/data/torrents/completed']
  protocols = "torrent"
  timeout = "10s"
  delete_orig = false

[[readarr]]
  url = "http://172.20.0.1:8787"
  api_key = "0123456789abcdef0123456789abcdef"
  paths = ['/data/torrents/completed']
  protocols = "torrent"
  timeout = "10s"
  delete_orig = false

##################################################################################
### ###  STOP HERE ### STOP HERE ### STOP HERE ### STOP HERE #### STOP HERE  ### #
### Only using Starr apps? The things above. The below configs are OPTIONAL. ### #
##################################################################################

##-Folders-#######################################################################
## This application can also watch folders for things to extract. If you copy a ##
## subfolder into a watched folder (defined below) any extractable items in the ##
## folder will be decompressed. This has nothing to do with Starr applications. ##
##################################################################################
#[[folder]]
# path = '/some/folder/to/watch'
## Path to extract files to. The default (leaving this blank) is the same as `path` (above).
# extract_path = ""
## Delete extracted or original files this long after extraction.
## The default is 0. Set to 0 to disable all deletes. Uncomment it to enable deletes. Uses Go Duration.
# delete_after = "10m"
## Delete extracted files after successful extraction? true/false, no quotes. Honors delete_after.
# delete_files = false
## Delete original items after successful extraction? true/false, no quotes. Honors delete_after.
# delete_original = false
## Disable extraction log (unpackerred.txt) file creation? true/false, no quotes.
# disable_log = false
## Move extracted files into original folder? If false, files go into an _unpackerred folder.
# move_back = false
## Set this to true if you want this app to extract ISO files with .iso extension.
# extract_isos = false


################
### Webhooks ###
################
# Sends a webhook when an extraction queues, starts, finishes, and/or is deleted.
# Created to integrate with notifiarr.com.
# Also works natively with Discord.com, Telegram.org, and Slack.com webhooks.
# Can possibly be used with other services by providing a custom template_path.
###### Don't forget to uncomment [[webhook]] and url at a minimum !!!!
#[[webhook]]
# url    = "https://notifiarr.com/api/v1/notification/unpackerr/api_key_from_notifiarr_com"
# name   = ""    # Set this to hide the URL in logs.
# silent = false # do not log success (less log spam)
# events = [0]   # list of event ids to include, 0 == all.
## Advanced Optional Webhook Configuration
# nickname      = ""    # Used in Discord and Slack templates as bot name, in Telegram as chat_id.
# channel       = ""    # Also passed into templates. Used in Slack templates for destination channel.
# exclude       = []    # list of apps to exclude, ie. ["radarr", "lidarr"]
# template_path = ""    # Override internal webhook template for discord.com or other hooks.
# template      = ""    # Override automatic template detection. Values: notifiarr, discord, telegram, gotify, pushover, slack
# ignore_ssl    = false # Set this to true to ignore the SSL certificate on the server.
# timeout       = "10s" # You can adjust how long to wait for a server response.
# content_type  = "application/json" # If your custom template uses another MIME type, set this.


#####################
### Command Hooks ###
#####################
# Executes a script or command when an extraction queues, starts, finishes, and/or is deleted.
# All data is passed in as environment variables. Try /usr/bin/env to see what variables are available.
###### Don't forget to uncomment [[cmdhook]] and url at a minimum !!!!
#[[cmdhook]]
# command = '/my/cool/app' # Path to command or script.
# shell   = false # Runs the command inside /bin/sh ('nix) or cmd.exe (Windows).
# name    = ""    # Provide an optional name for logging.
# silent  = false # Hides command output from logs.
# events  = [0]   # list of event ids to include, 0 == all.
## Optional Command Hook Configuration
# exclude       = []    # list of apps to exclude, ie. ["radarr", "lidarr"]
# timeout       = "10s" # You can adjust how long to wait for a server response.